Product Overview
M5R1 Standard Manual Transmission Synchronizer Blocker Ring, Bearing, Gasket And Seal Kit.
- 5-Speed
- Aluminum Case And Top Cover
- 1-Piece 2nd Synchronizer
- 36-Tooth 5th And Reverse Slider
Compatible with / Fits Ford Vehicles
1988-1994 Aerostar (3.0L RWD)
1988-1988 Bronco II (2.3L RWD or 4WD)
1988-1990 Bronco II (2.9L RWD or 4WD)
1991-2001 Explorer (Non Sport Models) (4.0L RWD or 4WD)
1991-2000 Explorer Sport And Sport Trac (4.0L RWD or 4WD)
1988-on Ranger (2.3L RWD or 4WD)
1988-1992 Ranger (2.9L RWD or 4WD)
1991-on Ranger (3.0L RWD or 4WD)
1990-on Ranger (4.0L RWD or 4WD)
- The following parts are included in the original kit. Individual components may also be ordered separately, subject to availability. Quantities shown are per kit.
1 × 306316 - Gasket
1 × 306323 - Gasket
1 × 315304 - Gasket
1 × 306084 - Seal
1 × 336070 - Seal
1 × 372070 - Seal
1 × 476074 - Seal
1 × 306210 - Bearing
1 × 306211 - Bearing
1 × 306240 - Bearing
1 × 306241 - Bearing
1 × 306260 - Bearing
1 × 306261 - Bearing
1 × 306267 - Bearing
1 × 476262 - Bearing
1 × 306705A - Synchronizer Ring
1 × 306706 - Synchronizer Ring
4 × 476701 - Synchronizer Ring
1 × 306699 - Slinger
2 × 306832 - Shifter Seat
3 × 476484 - Plug
1 × ATAS110 - O-Ring
1 × ATAS115 - O-Ring
- Please order if needed (not included in the kit):
1 x 306271 - 1st and 2nd gear needle bearing
1 x 306273 - 3rd gear needle bearing
1 x 306275 - 5th gear needle bearing
1 x 306278 - reverse idler gear needle bearing
1 x 306277-1 - reverse gear needle bearing
1 x 306241 - synchro thrust bearing
- If you are not sure if you have a 30 or 36 teeth 5th / reverse slider please order this kit and the following two synchros to be covered for both variants:
1 x 306705
1 x 306706A
